MICRON MT36KSF2G72PZ-1G6P1 16GB DDR3 1600 RDIMM
The Micron MT36KSF2G72PZ-1G6P1 is a 16GB DDR3L registered ECC DIMM running at 1600 MT/s, aimed at enterprises maintaining or extending DDR3-era server fleets — virtualization hosts, database servers, and storage systems where uptime and verified memory integrity matter. As an RDIMM, it relies on registered signals to reduce electrical load, allowing higher memory population per channel in compatible platforms. Practical note: DDR3L modules are not interchangeable with DDR4 or DDR5 RDIMMs, so confirm your platform generation before ordering.
Key specifications (table)
| Parameter | Specification |
|---|---|
| Model Number | MT36KSF2G72PZ-1G6P1 |
| Brand | Micron |
| Memory Type | DDR3L ECC RDIMM (Low Voltage Registered DIMM) |
| Capacity | 16GB |
| Data Rate | 1600 MT/s |
| Speed Grade | PC3L-12800R |
| Rank Configuration | 2Rx4 (Dual Rank) (check your platform’s rank-per-channel limits when populating all DIMM slots) |
| Error Correction | ECC Supported (requires a server platform with ECC-capable memory controller) |
| CAS Latency | CL11 |
| Operating Voltage | 1.35V (DDR3L low-voltage operation; many controllers also run it at standard 1.5V DDR3 timing — platform dependent) |
| Pin Count | 240-pin |
| Form Factor | RDIMM (Registered DIMM) |
| DRAM Architecture | x4-based DRAM (x4 DRAM enables chipkill-class error correction on supporting platforms) |
| Data Width | 72-bit (64-bit Data + 8-bit ECC) |
| Number of DRAM Chips | 36 |
| Compliance | JEDEC DDR3L Standard |
| Memory Bandwidth | 12.8 GB/s |
| Module Height | 30 mm (fits most standard server chassis; verify clearance in 1U layouts) |
| Operating Temperature | 0°C to 70°C (commercial range; ensure adequate server airflow) |
| Applications | Enterprise Servers, Data Centers, Virtualization Platforms, Database Servers, and Storage Systems |
Good to know
- Compatibility: works only in DDR3/DDR3L RDIMM slots — it cannot be mixed with DDR4 or DDR5 modules, and unbuffered desktop DDR3 is physically and electrically incompatible. Always populate channels in matched sets per your server vendor’s memory population guidelines.
- Family positioning: within Micron’s DDR3L RDIMM lineup, this is a dual-rank x4 16GB module at PC3L-12800R speed — a mainstream capacity/speed point widely validated in enterprise platforms of its era, with ECC and registered signaling standard for server duty.
- Buying tip: source modules in matched sets (same model, speed grade, and rank) to keep channel populations balanced, and confirm the exact part number against your server’s qualified vendor list (QVL) before deployment.
For tray and reel pricing, current stock by part number and date code, and volume discounts on bulk orders, request a bulk quotation.
The Micron MT36KSF2G72PZ-1G6P1 is a 16GB DDR3L registered ECC DIMM running at 1600 MT/s, aimed at enterprises maintaining or extending DDR3-era server fleets — virtualization hosts, database servers, and storage systems where uptime and verified memory integrity matter. As an RDIMM, it relies on registered signals to reduce electrical load, allowing higher memory population per channel in compatible platforms. Practical note: DDR3L modules are not interchangeable with DDR4 or DDR5 RDIMMs, so confirm your platform generation before ordering.
Key specifications (table)
| Parameter | Specification |
|---|---|
| Model Number | MT36KSF2G72PZ-1G6P1 |
| Brand | Micron |
| Memory Type | DDR3L ECC RDIMM (Low Voltage Registered DIMM) |
| Capacity | 16GB |
| Data Rate | 1600 MT/s |
| Speed Grade | PC3L-12800R |
| Rank Configuration | 2Rx4 (Dual Rank) (check your platform’s rank-per-channel limits when populating all DIMM slots) |
| Error Correction | ECC Supported (requires a server platform with ECC-capable memory controller) |
| CAS Latency | CL11 |
| Operating Voltage | 1.35V (DDR3L low-voltage operation; many controllers also run it at standard 1.5V DDR3 timing — platform dependent) |
| Pin Count | 240-pin |
| Form Factor | RDIMM (Registered DIMM) |
| DRAM Architecture | x4-based DRAM (x4 DRAM enables chipkill-class error correction on supporting platforms) |
| Data Width | 72-bit (64-bit Data + 8-bit ECC) |
| Number of DRAM Chips | 36 |
| Compliance | JEDEC DDR3L Standard |
| Memory Bandwidth | 12.8 GB/s |
| Module Height | 30 mm (fits most standard server chassis; verify clearance in 1U layouts) |
| Operating Temperature | 0°C to 70°C (commercial range; ensure adequate server airflow) |
| Applications | Enterprise Servers, Data Centers, Virtualization Platforms, Database Servers, and Storage Systems |
Good to know
- Compatibility: works only in DDR3/DDR3L RDIMM slots — it cannot be mixed with DDR4 or DDR5 modules, and unbuffered desktop DDR3 is physically and electrically incompatible. Always populate channels in matched sets per your server vendor’s memory population guidelines.
- Family positioning: within Micron’s DDR3L RDIMM lineup, this is a dual-rank x4 16GB module at PC3L-12800R speed — a mainstream capacity/speed point widely validated in enterprise platforms of its era, with ECC and registered signaling standard for server duty.
- Buying tip: source modules in matched sets (same model, speed grade, and rank) to keep channel populations balanced, and confirm the exact part number against your server’s qualified vendor list (QVL) before deployment.
For tray and reel pricing, current stock by part number and date code, and volume discounts on bulk orders, request a bulk quotation.
