Q2P63A HPE Optical Module
The HPE Q2P63A is a 16G SFP+ short-wave optical transceiver intended for Fibre Channel storage networking, fitting SAN switches and server HBAs that require 16 Gbps links over multimode fiber. It suits buyers deploying or maintaining HPE storage environments where 16G FC uplinks or server connectivity are needed. Note that reach differs significantly by fiber grade: 300 m on OM3 versus 33 m on OM2, so verify your existing cabling before ordering.
Key specifications (table)
| Parameter | Specification |
|---|---|
| Model | Q2P63A |
| Type | 16G SFP+ Optical Transceiver |
| Data Rate | 16 Gbps |
| Transmission Distance | 300 m (OM3 fiber) / 33 m (OM2 fiber) |
| Wavelength | 850 nm (short-wave, typical for multimode optics) |
| Connector Type | LC Duplex |
| Compliance | SFP+ MSA (Multi-Source Agreement) |
| Supported Fiber | Multimode Fiber (OM2/OM3) |
| Compatible Devices | HPE supported switches/servers (verify HBA/switch firmware compatibility) |
| Power Consumption | < 1 W |
| Operating Temperature | 0–70°C |
| Form Factor | Standard SFP+ |
Good to know
- As a short-wave 850 nm multimode module, it pairs with LC duplex OM2/OM3 patch cabling only — it will not reach on single-mode OS2 fiber, and OM2 runs are limited to 33 m.
- Within HPE’s transceiver family, this sits in the 16G Fibre Channel class; it is not a 16G Ethernet module, so confirm your switch ports are FC-capable before mixing with 8G/32G generation optics.
- Buying tip: order matched pairs (both ends of the link) and confirm the exact HPE platform part list for your switch or HBA model to avoid firmware lock-outs common with branded optics.
For tray and reel pricing, current stock by part number and date code, and volume discounts on bulk orders, request a bulk quotation.
The HPE Q2P63A is a 16G SFP+ short-wave optical transceiver intended for Fibre Channel storage networking, fitting SAN switches and server HBAs that require 16 Gbps links over multimode fiber. It suits buyers deploying or maintaining HPE storage environments where 16G FC uplinks or server connectivity are needed. Note that reach differs significantly by fiber grade: 300 m on OM3 versus 33 m on OM2, so verify your existing cabling before ordering.
Key specifications (table)
| Parameter | Specification |
|---|---|
| Model | Q2P63A |
| Type | 16G SFP+ Optical Transceiver |
| Data Rate | 16 Gbps |
| Transmission Distance | 300 m (OM3 fiber) / 33 m (OM2 fiber) |
| Wavelength | 850 nm (short-wave, typical for multimode optics) |
| Connector Type | LC Duplex |
| Compliance | SFP+ MSA (Multi-Source Agreement) |
| Supported Fiber | Multimode Fiber (OM2/OM3) |
| Compatible Devices | HPE supported switches/servers (verify HBA/switch firmware compatibility) |
| Power Consumption | < 1 W |
| Operating Temperature | 0–70°C |
| Form Factor | Standard SFP+ |
Good to know
- As a short-wave 850 nm multimode module, it pairs with LC duplex OM2/OM3 patch cabling only — it will not reach on single-mode OS2 fiber, and OM2 runs are limited to 33 m.
- Within HPE’s transceiver family, this sits in the 16G Fibre Channel class; it is not a 16G Ethernet module, so confirm your switch ports are FC-capable before mixing with 8G/32G generation optics.
- Buying tip: order matched pairs (both ends of the link) and confirm the exact HPE platform part list for your switch or HBA model to avoid firmware lock-outs common with branded optics.
For tray and reel pricing, current stock by part number and date code, and volume discounts on bulk orders, request a bulk quotation.
